·網站首頁    ·企業概況    ·油田環保技術    ·設備與產品    ·技術服務    ·學術論壇    ·人才招聘  
天津15选5_安全购彩
   設備與產品
SGOT海上潛式旋流收油系統/SGOT maritime submersible cyclone o
雙旋流除油器/Double-cyclone Oil Separator
動力速沉器/High-speed Sedimentation Machine
全自動精細過濾器/Precision Filter
污泥處理設備/Sludge treatment equipment
聯合加藥裝置/Combined Agent-adding Device
自動化與監控/Automation and monitoring
電話
010-65188928
傳真
010-65188928
公司地址
注冊地址:北京市平谷區平谷鎮府前街31號
郵編 102299
E-mail:
zhongtianyou@www.rickbery.com
 
 
   SGOT海上潛式旋流收油系統
 
 
SGOT海上旋流收油系統
SGOT maritime submersible cyclone oil collecting system
 
 
SGOT海上潛式旋流收油系統主要由SGOT海上潛式旋流收油機、液壓動力站、自動化控制系統組成。依據不同的作業工況需求,還可以配置SGOT雙筒螺旋板油水分離器、可調海螺引流流道、可調潛深浮力系統等.
SGOT maritime submersible cyclone oil collecting system is mainly composed of SGOT seaborne submerged swirling oil collector, hydraulic power station and automatic control system. According to requirements of different operation conditions, SGOT binocular spiral plate of oil-water separators, adjustable conch-type drainage channel, adjustable submerged buoyancy system and so on can be configured.
 
SGOT海上潛式旋流收油機技術原理:
利用旋流離心分離聚集原理,通過水面下裝置底部的旋轉槳葉和水面上裝置頂部的螺旋穩油標識桿,在水面形成兩個疊加的離心渦流場,再結合渦流場中心吸油泵的軸向吸力,在海面形成一個由碗型重力場、雙離心渦流場、巨大的遠場回流、軸向吸力,四個流場協同作業的巨大向心收油面,迅速把海面污油掃吸進吸油口,再通過臍帶管傳輸到船上或岸上進行油水分離。
區別于傳統的接觸式、粘附式收油方法,SGOT下沉式旋流收油技術不是直接生硬地去撈油,而是迂回巧妙地以水引油,通過一個蝶形流場的拖拽力以及溢油本身的黏附力,把油沿海平面掃吸進收油口。對于難以回收的薄油層、冰期油層、高粘度原油,以及某些海面垃圾都能快速收集。
Working principle of SGOT maritime submersible cyclone oil collecting technology:
Based on the cyclone centrifugal separation gathering principle, two superimposed centrifugal vortex fields are formed via the propeller on the bottom of the unit under the sea and the screw stabilizing oil marking rod on the top of the unit above the sea. In combination of axial suction of the oil suction pump at the center of the vortex field, a huge centripetal oil collecting surface is formed on the sea surface due to the collaborative operation such four flow fields as bowl-shape gravity field, double centrifugal vortex field, great far field backflow and axial suction, which can quickly suck the oil spill on the sea surface into the oil suction, then deliver it to the ship or to the shore via an umbilical for oily water separation.
Different from a traditional contact type or adhesion type oil collection, the SGOT sinking type swirling flow oil collecting technology instead of dredging oil up awkwardly, indirectly and cleverly diverts oil with water and sweep the oil into the oil suction via the drag force of a butterfly flow field and adhesion force of oil spill. It can suck oil and quickly collect oil from an oil sheet or an oil layer of the glacial period, high-viscosity crude oil as well as some wastes on the sea surface.
 
SGOT雙筒螺旋板式油水分離器技術原理:
通過內筒、外筒和螺旋板形成螺旋流道,利用油水密度和黏度的差異,使水沿外筒內壁螺旋向下排出罐體;油沿內筒外壁螺旋向上,結合軸心處螺桿的旋轉進一步分離及提升排出罐體。
Double Cylinder Screw Plate Oily water Separator
The double cylinder screw plate oily water separator can form a spiral channel based on the two cylinders and the screw plate. By utilizing the difference in oil-water density and viscosity, water can be drained downward and exhaust along the spiral channel between the inside and outside cylinders. Oil can be drained upward and exhaust along the spiral channel between the inside and outside cylinders, coupled with the revolvingly-lifting assisted power of the center screw.
 
技術優點:
1) 采用雙渦旋蝶形流場聚集收油原理,可以不需要圍油欄協助,在開闊或狹窄海域單獨收油作業;也可以配合工作船在行使中收油作業;并且在快速收集溢油的同時可以有效控制溢油的擴散。
2) 適用各種海況作業溫度(-20-50℃),適用回收溢油粘度不限。由水下和水上兩個容積泵串聯使用,泵送能力大、穩定;收油口軸心有螺旋輸送機構,對高粘度溢油、超高粘度溢油(凝點狀態)或海面漂浮垃圾都可以一并吸入;垃圾被水下泵前的破碎裝置打碎,被船上泵前的垃圾清理器清理,可以不停機連續作業。
3) 適用于各種厚度溢油油層回收。雙渦旋蝶形流場以收油口為中心沿海面掃吸溢油,對難以回收的薄油層、彩虹膜油層都能有效回收。
4) 配備油水分離裝置,在收油的同時油水分離,使回收液體含油>90%。
5) 收油作業時收油頭的絕大部分潛沒在水下,避開了波浪的影響,具有一定的抗風浪能力;如果溢油層著火,收油機可以自航到燃燒油層下回收作業,吸入收油口的溢油由于缺氧以及海水的降溫,在管道內熄滅;可用于海面以下0.5m內的半潛油的收集,特別定制設計可以做到2m。
6) SGOT潛式旋流收油機全部自動化控制,并配備手持遙控,有效遙控作業半徑100m,正常收油作業僅需一人遠距離操作。提高了作業能力,避免了溢油區域有毒氣體及爆炸對人身的傷害危險。
7) 所有接頭均采用國際通用快速接頭,方便操作使用。
8) 整體撬裝集成,方便快速裝配作業。標準化模塊設計,維護使用方便、成本低。配備叉車孔、吊裝索具及繩纜,方便集裝運輸和存放。
 
Technical advantages:
1) The principle of oil collecting in butterfly-shaped flow field of double swirls is adopted so that oil booms are not necessary and the oil collecting operation can be carried out separately in open or narrow sea areas. The oil collecting operation can also be carried out in coordination with work-boats in navigation. Besides, the oil spill can be collected in a fast speed and the proliferation of oil spill can be effectively controlled.
2) It is suitable for all kinds of operating temperatures at seas (-20-50℃) and the applicable viscosity of recovered oil spill is unlimited. Since the positive displacement pumps below and above water are in series connection, the pumping capacity is strong and stable. The axis of the oil collecting mouth is equipped with a spiral delivering mechanism, so that high-viscosity oil spill and super high-viscosity oil spill (freezing state) or floating garbage at seas can be inhaled; garbage can be broken by the breaking plant before the submersible pump, and cleaned by the garbage cleaner before the pump on the ship, so that continuous operation without closing down can be carried out.
3) It is suitable for recovery of oil spill layer with all kinds of thickness degrees. The butterfly-shaped flow field of double swirls sweeps the oil spill along the water surface with oil collecting mouth as the center, so that the thin oil layer and the rainbow membrane oil layer can be effectively recovered.
4) The oil-water separation device is equipped so that oil and water can be separated in oil collection and the oil content in liquid collected will be more than 90%.
5) Most of the oil collection head in oil collection operation is submerged in the water, which avoids the effect of waves and has certain capacity of wave resistance; if the oil spill layer is on fire, the oil collector can be self-propelled into recovery operation under the flaming oil layer. Then the oil spill inhaled in the oil collecting mouth will be extinguished inside the pipelines. It can be used in the collection of semi-submerged oil in 0.5 meters below the water surface and the specially customized design can reach 2 meters.
6) SGOT submerged swirling oil collector is automatically controlled and equipped with hand-held remote control. The radius of effective remote control operation is 100 meters and normal oil collecting operation only needs a person for distance operation. In this way, the operation capacity is improved and the danger of toxic gases and explosion in oil spill areas can be avoided.
7) All fittings adopt the internationally quick fittings for general use which are convenient for operation.
8) The whole system is skid-mounted in integration which is convenient for quick assembly operation. The system adopts standardized module design with convenient maintenance and utilization and low cost. Forklift holes, hoisting gears and ropes are equipped for convenience of transportation and storage.
 
發展歷程
Development history
 
2010年5月,公司向負責處理墨西哥灣漏油的 “The Alternative Response Technology Team”提供的漏斗形控油罩技術成功應用于墨西哥灣漏油事故處理。
In May, 2010 the Funnel-Shaped Containment Cap provided by SGOT was employed effectively by “The Alternative Response Technology Team”, which was responsible for dealing with the BP oil spill crisis in Gulf of Mexico.
2010年7月,公司的第一臺SGOT下沉式旋流樣機在大連金州事故現場試驗成功。
In July 2010, the first SGOT submersible cyclone oil collecting has been successfully tested in Dalian Jinzhou accident scene.
2011年11月,中國海上搜救中心組織交通部科技司、海事局、救撈局、水運局、環保中心和中石油安全環保及海上應急指揮中心、中石化安全環保局、中海油質量和健康安全環保部九家單位的代表專家參加了“SGOT海上應急收油系統現場作業演示暨座談會”。現場觀摩取得圓滿成功,與會專家一致認為:此項 “中國創造”的技術采用物理法回收海上溢油,具有節能環保和顯著的環境公益性,為解決海上石油儲運、近海石油開采的環境安全隱患開辟了一條新路,對未來海上溢油應急搶險有推廣價值;
2011, representatives and experts from Science and Technology Apartment of Ministry of Transportation, Maritime Safety Administration, Salvage Bureau, China Shipping Agency, Center of Environmental Protection, Center Of Environmental Protection, Sinopec Safety and Environment Protection Ministry , Quality and Health, Safety, Environment Protection Department of CNOOC, participated in the forum for demonstrating SGOT Offshore Oil Spill Emergency Response System, which gained wide praises. The experts present at the conference agreed that this “Innovate-by-China” technology which collects oil spilt in marine in a physical way is energy-saving as well as environmentally-friendly and it paves a new way to deal with the potential dangers in marine oil transportation and offshore oil rigs so it is well worth promoting in responding to emergent offshore oil spill in the future.
2012年6月,中國航海學會組織召開了“SGOT下沉式旋流場海上溢油回收裝置”項目科技成果鑒定會,與會專家通過了該項目“總體技術達到國際先進水平,在下沉式旋流技術應用方面處于國際領先水平”的鑒定意見。參加會議的專家有中國科學院院士段雪、中國工程院院士胡文瑞、中國海上搜救中心及國家海事局高級工程師翟久剛、石油大學校長王瑞和等;
On June 30th, 2012 China Institute of Navigation conducted an evaluation meeting for the SGOT Sinking Swirling Flow Field Marine Oil Spill Collecting Device. All the experts at the meeting reached the consensus that the technology had had met the advanced international standards and the technology application of “Sinking and Swirling Flow” had reached international leading levels. Those experts included Duan Xue, the member of The Chinese Academy of Sciences, Hu Wenrui the member of The Chinese Academy Engineering, Zhai Jiugang the senior engineer of the Center of China Maritime Search and Rescue Administration, and Wang Ruihe the president of China Petroleum University, etc.
2012年,SGOT海上應急收油系統榮獲“國家重點新產品證書”;
In 2012, the “SGOT Off-shore Oil Spill Emergency Response System” was awarded as “New National Key Product”
2014年12月,“SGOT海上應急收油裝置” 進入科技部、工信部、環保部三部委聯合頒發的《國家鼓勵發展的重大環保技術裝備目錄》,公司成為推廣類環境污染應急處理重大環保技術裝備依托單位;
In March of 2014, Zhang Ling, the GM and patent inventor gave a speed at the ARF Seminar regarding Regional Cooperation on Offshore Oil Spill Regional Cooperation Conference as the only representative for environmental protection enterprises in Southeast Asia. The SGOT sinking type swirling flow field recovery technology has been highly regarded and concerned by government representatives from all the participating countries.
2014年3月和2015年12月,公司作為東南亞環保企業代表兩次參加東盟會議“AFR Seminar on the Regional Cooperation on Offshore Oil Spill”,介紹SGOT潛式旋流收油機,向世界展示了中國創造的新收油技術。
In March 2014 and December 2015, as a representative of environmental protection enterprises in Southeast Asia took part in the ASEAN meeting “AFR Seminar on the Regional Cooperation on Offshore Oil Spill”, introduced the SGOT submersible cyclone oil collecting machine and showed the world about the new oil collecting technology created by China.
2015年11月,“SGOT下沉式旋流場海上溢油回收裝置”獲得2015年度北京市科學技術獎二等獎。
In November, 2015, the SGOT sinking type swirling flow field skimmer won the second prize of the 2015 Beijing Science and Technology Award.
2016年7月14日,SGOT-Ⅲ型海上收油系統在山東威海參加了2016西北太平洋行動計劃四國海上溢油應急聯合演習并取得圓滿成功。
In July 14, 2016, SGOT- II type maritime oil collecting system participated in the Northwest Pacific Four Countries oil spill drill in Shandong Weihai.
 
SGOT-Ⅰ型海上收油系統
SGOT-I cantilever crane cyclone oil Collector
 
SGOT-I cantilever crane cycloe oil Collector consists of one main module
Including: SGOT submersible cyclone oil collector, Hydraulic pump station, Oily water separator, Oil collecting pump, Telescoping boom, Skid
 
應用領域:港灣、湖泊、碼頭等較平靜水面溢油處理
It is suitable for oil spill treatment in the near shore including shore, platform, wharf ,etc.
用戶單位:中國石油海上應急救援響應中心
User: PetroChina Marine Emergency Rescue Response Center
 
SGOT-Ⅱ型海上收油系統
SGOT-II Suspending Vortex Oil Collector with Telescoping Jib
 
設備組成:SGOT-Ⅱ型海上收油系統由收油撬和油水分離撬兩個撬體組成,收油撬包括收油器和轉盤伸縮吊臂兩部分;油水分離撬包括油水分離器和液壓動力站兩部分。
SGOT-II Suspending Vortex Oil Collector with Telescoping Jib consists of two main modules and other supporting facilities:
 
應用領域:外海、港口、鉆井平臺、浮冰區、近岸等大型溢油事故應急處理
Specially designed for Chinese maritime patrol boats (800-ton), it can be conveniently placed on decks of patrol boats and is suitable for emergency treatment of oil spill accidents in open waters, harbors and docks, and narrow shore waters.
用戶單位:中海石油環保服務(天津)有限公司
User Unit: China Offshore Environmental Service Ltd.

SGOT-Ⅲ型海上收油系統
SGOT-III Suspending Vortex Oil Collector with Frame Telescoping Jib

設備組成:SGOT-Ⅲ型海上收油系統主要由收油器、油水分離機、液壓動力站和框架式伸縮臂四部分組成。

SGOT-III Suspending Vortex Oil Collector with Frame Telescoping Jib consists of two main modules and other supporting facilities

 
應用領域:外海、港口、鉆井平臺、浮冰區、近海岸等水域;800噸級海上巡邏艇配備使用,或者直接放置在港口或碼頭使用。
Specially designed for Chinese maritime patrol boats (800-ton), it can be conveniently placed on decks of patrol boats and is suitable for emergency processing of oil spill accidents in open waters, harbors and docks, and narrow shore waters.
 打印本頁 [ 關閉窗口 ] 向上
 
·網站首頁 ·企業概況 ·油田環保技術 ·設備與產品 ·技術服務 ·學術論壇 ·人才招聘